Moisten a clean cloth, soft paper towel, or clean synthetic sponge with a mild detergent or glass cleaner and wipe the board in a circular motion.
Wipe the surface dry with a clean cloth.
DO NOT clean the glass when it’s hot or in direct sunlight. Allow water or cleaning residue to remain on the glass surface. Use abrasive cleaning solutions or materials for maintenance cleaning. Allow the metal parts of the cleaning equipment to contact the glass. Use razor blades on glass surfaces.
The surface is not intended for writing purposes. Avoid marking on the surface with writing tools.
Only clean with water-based or solvent-based cleaners. Do not saturate.
NOTE: Fabrics have been developed to withstand regular cleaning, maintenance, and disinfection. Please follow the manufacturer’s instructions on cleaning and disinfection agents. We recommend spot-testing on an inconspicuous part of the material first. Fabric samples are available for testing by contacting
The surface is not intended for writing purposes. Avoid marking on the surface with writing tools.
1. Vacuum to remove dust.
2. Remove spills immediately using a clean, damp cloth or with soap and water.
3. Repeat using only clean water, then pat dry with a lint-free cloth. Avoid using wax polishes, solvents, or concentrated abrasives. Carpet and fabric cleaners can be used.
4. Blot excess spills from the material as quickly as possible.
5. Wipe with a damp cloth. If stains persist, apply small amounts of carpet cleaner mixed with water on a damp cloth.
6. Blot well after each application. For more difficult stains, damp a soft white cloth with a diluted bleach solution (10% bleach / 90% water). Dab gently.
7. Repeat using only a clean, water-dampened cloth to remove bleach concentration. Pat dry with a lint-free cloth.
Glass surfaces should be cleaned with a soft cloth and a suitable glass cleaner. Spray the cleaner onto the cloth rather than directly onto the surface, especially near edges, frames or mounted components. Wipe the surface evenly and dry it with a clean cloth to avoid streaks. For fingerprints, dust or light marks, regular glass cleaner is usually sufficient. Avoid abrasive pads, scouring powders or sharp tools. These can scratch or damage the glass surface.
Textile surfaces should be cleaned carefully to avoid damaging the fabric structure. For regular maintenance, remove dust with a soft brush or vacuum cleaner with a suitable upholstery attachment. For stains, act as soon as possible. Gently blot the area with a clean cloth. Do not rub aggressively, as this can spread the stain or damage the textile. Use only cleaning products that are suitable for textile surfaces. Always test on a small, less visible area before cleaning a larger surface.
Felt surfaces require gentle cleaning. For regular care, remove dust with a soft brush or vacuum cleaner with a suitable attachment. If a mark or stain appears, blot the area gently with a clean cloth. Avoid using too much water, as this can affect the shape, texture or appearance of the felt. Do not scrub the surface. Excessive rubbing can damage the fibers and alter the material’s visual appearance.
Do not use abrasive pads, steel wool, scouring powders or sharp scraping tools on glass, textile or felt surfaces. Avoid aggressive chemicals unless they are specifically approved for the material. Cleaning products that work well on one surface may not be suitable for another.
Glass, textile and felt can be used in different product combinations. The best cleaning method may depend on the exact product, installation and environment.
For product-specific cleaning advice, consult the Polyvision Cleaning & Care Guide or contact the Polyvision team.
Use a soft cloth and a suitable glass cleaner. Wipe the surface evenly and dry it with a clean cloth to avoid streaks.
Can textile surfaces be vacuumed?
Yes. Use a vacuum cleaner with a suitable upholstery attachment and clean the surface gently.
How do I clean felt?
Use a soft brush or vacuum cleaner with a suitable attachment. For marks or stains, blot gently with a clean cloth and avoid using too much water.
Can I use the same cleaner on glass, textile and felt?
No. Each material requires a different cleaning method. Always use a cleaner that is suitable for the specific surface.
What should I avoid?
Avoid abrasive pads, steel wool, sharp tools, aggressive chemicals and excessive water on textile or felt surfaces.
