• Cleaning + Care

Cleaning + Care

With proper care, your surface can look like new for years.

CeramicSteel Cleaning Instructions

Before the first use of your CeramicSteel:

  1. If present, remove the protective film.
  2. Wipe board with a clean cloth moistened with a high-quality whiteboard cleaner.
  3. Wipe surface dry with a clean cloth.

Daily cleaning instructions for your CeramicSteel:

  1. Wipe surface with a clean cloth moistened with warm water.
  2. Wipe surface dry with a clean cloth.

Weekly cleaning instructions for your CeramicSteel:

  1. Wipe surface with a clean cloth moistened with a high-quality whiteboard cleaner.
  2. Wipe surface dry with a clean cloth.
  3. Surfaces used moderately should be cleaned two to three times per week. Surfaces used more intensely may require daily cleaning.

Note: Using an inappropriate cleaner may result in poor dry erase quality due to the buildup of residue from the cleaner on the surface.

Glass Cleaning Instructions

Moisten a clean cloth, soft paper towel or clean synthetic sponge with a mild detergent or glass cleaner and wipe the board in a circular motion. Wipe surface dry with a clean cloth.

Note: Do not clean the glass when it’s hot or in direct sunlight. Do not allow water or cleaning residue to remain on the glass surface. Do not use abrasive cleaning solutions or materials for maintenance cleaning. Do not allow metal parts of cleaning equipment to contact the glass. Do not use razor blades on glass surfaces.

Textile Cleaning Instructions

Clean only with water-based or solvent-based cleaner.

Do not saturate.

Note: Fabrics have been developed to withstand regular cleaning maintenance and disinfection. Please follow the manufacturer instructions on cleaning and disinfection agents. We recommend spot-testing on an inconspicuous part of the material first. Fabric samples are available for testing by contacting samples@polyvision.com .

Felt Cleaning Instructions

General Cleaning + Maintenance

Vacuum to remove dust.

Remove spills immediately using a clean, damp cloth or with soap and water. Repeat using only clean water, then pat dry with a lint-free cloth.

Avoid using wax polishes, solvents, or concentrated abrasives. Carpet and fabric cleaners can be used.

Removing Markings + Residue

Blot excess spills from material as quickly as possible. Wipe with a damp cloth. If stains persist, apply small amounts of carpet cleaner mixed with water and a damp cloth. Blot well after each application.

For more difficult stains, dampen a soft white cloth with a diluted bleach solution (10% bleach / 90% water). Dab gently. Repeat using only a clean, water-dampened cloth to remove bleach concentration. Pat dry with a lint-free cloth.

*Surface is not intended for writing purposes. Avoid marking on the surface with writing tools.